Canton 11-186 Oil Pan Small Block Chevy Open Chassis Pro 16″ Long 85 & Earlier

This open chassis "L" style steel wet sump pan is for ?85 and earlier Small Block Chevys. It is designed for chassis without x-members under the engine (asphalt and dirt modifieds, sprint cars, and some late models). It has an 11-1/2" wide, 16" long, 7" deep ?L? sump with a 9 quart system capacity. Requires use of one of our pickups and an offset aftermarket starter with a 153 or 168 tooth flywheel. Also an available option for this pan is #20-914 Pro Louvered Windage Tray, designed to replace the standard screen tray in this pan.

Additional Attributes:

GTIN: 00887753711243
Baffled: Yes
Capacity: 9 Quart System Capacity
Crank Scraper Included: No
Dipstick Port: Yes
Drain Plug Included: Yes
Engine: For S.B. Chevy 1985 and earlier blocks
Feature 1: Pro-Style Oil Recovery Pouch Extends Right Side of Pan Away From Crankshaft
Feature 2: Recovery Pouch Thins Out Atmosphere of Oil in Crankcase and Frees up Horsepower
Feature 3: Baffled with 6 Trap Doors/3 Directional Runners
Feature 4: Bolt On Slosh Baffle For Oil Control
Feature 5: Removable Screen Windage Tray
Feature 6: Provision for Canton Pan Mounted Dipstick
Feature 7: 1/2 NPT Temp Sensor Bung
Feature 8: Magnetic Drain Plug
Finish: Silver Plating
Gasket or Seal Included: No
Hardware Included: No
Kicked Out: Yes
Material: 16 Gauge Steel
Pickup Included: No
Recommended Accessory 1: 20-040 – Pickup for Small Block Standard Volume Pumps M55 & M55A
Recommended Accessory 2: 20-042 – Pickup for Small Block Standard Volume Pumps M155 w/ 3/4″ Tube
Recommended Accessory 3: 20-070 – Pickup for Small Block High Volume Pumps M55HV
Recommended Accessory 4: 20-072 – Pickup for Small block High Volume M155HV Pump w/ 3/4″ Tube
Recommended Accessory 5: 20-077 – Press In Pickup for M10552 & M10555 Pump
Recommended Accessory 6: 20-071 – Flange Mount Pickup for M10552 & M10555 Pump
Recommended Accessory 7: 20-100 – Pickup for Big Block 5 bolt pumps M77 & M77HV
Recommended Accessory 8: 20-850 – Universal Dipstick Kit 1/4? N.P.T. Fitting
Recommended Accessory 9: 20-854 – Universal Steel Braided Dipstick Kit 1/4″ N.P.T. Fitting
Stoke: 3.875
Windage Tray Included: Yes

Extended Information:

Emissions : CARB Eligible
Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 24.5 x 16.25 x 9.5 inches
Weight: 23 PG

PDF:

Pan Install – Standard Part B