Add to cart
Sanderson FR351C Header Set Sanderson FR460 Roadster Header, Big Block Ford Price range: $1,019.00 through $1,577.00
Sanderson small block Chevy Limefire Sanderson FRLF100 Limefire Header Set, Small Block Ford Price range: $833.00 through $1,092.00
Sale!

Sanderson FF758 Small Block Ford Bronco Header Set

Price range: $545.00 through $778.00

-5%

The Sanderson FF758 small block Ford header set fits 1965-77 Ford Bronco and other specialized applications.

Add to Cart
Sanderson FF7 Header Set
Sanderson FF758 Small Block Ford Bronco Header Set
$545.00 – $778.00Price range: $545.00 through $778.00
$
SKU: SDH-FF758 Category: Tags: , , , ,
Sanderson Headers logo

Free shipping on most orders over $250 using code “ShipFree” at checkout with destinations in the lower 48 states (Continental United States). Truck Freight, and oversize packaging are excluded.

  • 30 days easy returns
  • Most orders ship on the same day or within 48 hours
Guaranteed Safe Checkout

The Sanderson FF758 small block Ford header set fits 1965-77 Ford Bronco and other specialized applications. The FF758 features a 1-5/8″ primary tube diameter and is compatible with factory steering.

  • The FF758 is compatible with GT40-P cylinder heads!
  • Be sure to select the correct engine group (221-302 vs. 351w) when ordering.
  • Please select the correct transmission. 221-302 AOD applications require a special passenger side header.
  • For smaller 1-1/2″ primary tube version, order part #FF7

Includes all hardware necessary for installation.

SPECIFICATIONS:

Engine: Small Block Ford 221-302, 351W V8
Primary Tube Diameter: 1-5/8″
Collector Diameter: 2½”

FEATURES:

  • 16-Gauge Primary and Collector Tube Thickness
  • 3/8″ Thick Flange
  • Patented Flange Design Requires NO Gaskets
  • Tightest Fitting Header Available Anywhere!
  • Made in the USA

INCLUDES:

  • Header Bolt Set
  • Collector Reducer Set

OPTIONS:

Sanderson’s Ceramic Coating is recommended for every vehicle application and is the default finish selection choice above. To meet high standards of quality, Sanderson applies a multi-layer inside and outside aluminized ceramic coating in-house and then polishes the coating to a high luster. This aerospace and military-grade technology adds excellent protection to your headers while offering the benefit of thermal control in your engine bay. It also improves cylinder scavenging of exhaust gases and increases the longevity of your header investment.

Additional information

Weight 18 lbs
Dimensions 20 × 12 × 8 in
Sanderson Header Finish

Silver Ceramic Coated, Black Satin Ceramic Coated, Plain Steel (Unfinished)
SBF Engine Group

221-302, 5.0L, 351W
Ford Transmission

AOD / AOD-E / 4R70 / 4R75 Automatic, Manual, 3-Speed Automatic, Other

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Brand

Sanderson Headers

Sanderson Headers for street rods, classics, and muscle cars.
Sanderson Headers logo

SB Ford Flange Styles

UPDATE: The Sanderson small block Ford header flange has been redesigned to accommodate standard rectangular and square exhaust port designs. This new flange port opening is slightly wider, and the height is reduced somewhat. This change provides compatibility and proper sealing with more small block Ford cylinder head designs. It is compatible with 2.0″ mounting bolt spacing. Sanderson also offers a custom header flange with 3.0″ bolt spacing for an additional cost.

Factory, original equipment style Ford cylinder heads, and most aftermarket heads use a 2.0″ bolt spacing, measured across the port (see images below). Some aftermarket small block Ford cylinder heads include both the 2.0″ and 3.0″ bolt spacing, but Roush heads (SB427, for example) only use the 3.0″ bolt spacing.

The first cylinder head below is the Edelbrock Victor Jr. for small block Ford, and the second is a BluePrint cylinder head for small block Ford. Note the differences in flange bolt spacing. Even when a cylinder head offers both the 2.0″ and 3.0″ spacing, it is best to stick with the 2.0″ spacing for all but the most extreme engine applications with substantial port opening width.

ford bolt spacing edelbrock ford bp bolt spacing

Flange Issues with the 3.0″ bolt spacing:

The 3.0″ bolt spacing is a problem for thick-flange header sets because it makes installing the spark plugs virtually impossible, as shown in the images below. Typically, only header sets built with thinner 1/4″ – 3/16″ flanges are compatible with the 3.0″ bolt spacing. Sanderson now offers an optional unique, custom 3/8″ thick flange for the wider 3.0″ bolt spacing, which is available at an additional cost.

SB Ford 3.0" Flange Bolt Spacing SB Ford 3.0" Flange Bolt Spacing

Install Notes

  1. The Patented Leak-Free Design that Sanderson Headers offers is the only leak-free flange design on the market. Do Not Attempt To Use Flange Gaskets! The raised flange on the Sanderson Headers may buckle the gasket during tightening and create a leak! Click here for the installation procedure.
  2. Sanderson Headers are NOT emissions legal on pollution-controlled motor vehicles. It is the purchaser’s responsibility to verify local regulations for compliance.
  3. Wrapping your Sanderson Headers with ANY thermal tape immediately voids your header warranty. The best thermal protection for your headers is the Aluminized Ceramic Coating, available for every Sanderson Header. Please read our tech article on thermal coatings and header wraps.

Sanderson Warranty

Sanderson Header WarrantyLimited 5-Year General Warranty

Sanderson Street Rod Headers strives to supply our customers with the highest quality parts and services in the street rod industry. In keeping with this, we warrant and will repair or replace, at our option, after an inspection in our facility, any of our products that we found to have failed due to defects in either material or workmanship.  This warranty is activated by the return of the Warranty Card enclosed with every pair of headers. It is effective for FIVE YEARS * from the date of purchase, as indicated on the original invoice.

This Warranty does not cover products that fail due to improper motor tuning, alteration, disassembly, or damage caused by racing, misuse, neglect, abuse, improper installation, and/or accident or when used on applications that were not designed or approved. We are specifically not responsible for the costs of removal, installation, transportation, destruction of other components, inconvenience, loss of time, or other personal damages or for any other associated costs, including the application of aftermarket coatings applied by others. Sanderson Street Rod Headers shall not be liable for any and all consequential damages occasioned by the breach of any written or implied warranty pertaining to this sale in excess of the purchase price of the product(s) as found on the original invoice.

WRAPPING HEADERS WITH THERMAL TAPE VOIDS THE WARRANTY.

* Extremely compact header designs that locate the collector close to the exhaust ports are very sensitive to engine tuning. Improper air/fuel mix or timing of ignition and/or valvetrain can cause early failure due to excessive heat. For this reason,  part numbers CC2 and CC3 are offered with a two-year warranty period only. This includes header sets that utilize one of these headers as part of the set (part numbers CC4 and CC14, for example). The compact header side will hold a 2-year warranty. All other Warranty conditions apply.

Downloadable Version