Retrofit 67-72 Chevy Truck; Tilt Column Shift w/Rack; Polished Aluminum

This retrofit column is specifically designed to fit your rack & pinion system for your 1967-72 Chevy Truck and does NOT require modification to your original vehicle to install. This column is made shorter to lessen the angle of the u-joints. Using Borgeson joints and shafting, install your new steering column in place of the old using the original under dash mount and floor mount. A neutral safety switch is included and the shift pattern on the column allows you to either use a 3 or 4-speed automatic transmission. A shift linkage is required for installation and will attach to the lower shift arm provided on the column. A wiring harness adaptor is also included with this column. Using an adaptor, add an aftermarket wheel and the gripping surface of the new wheel will be in the same location as the original.

Additional Attributes:

GTIN:
Length: 30.125
Shifter Type: Column Mounted
Telescopic Steering Wheel: No
Tilt Steering Wheel: Yes
Universal Or Retrofit: Retrofit
Output Shaft Type: 3/4″ 36 Spline
Collapsible: No
Wiring Adaptor: Yes
4 Way Flasher: Yes
Wired For Horn: Yes
Finish: Polished Aluminum
Dash Mount: OEM
Floor Mount: OEM
Tube Diameter: 2
What Steering Wheel Fits: OEM w/ ididit Horn Kit or Aftermarket Wheel
Neutral Safety Switch: Yes
Ignition: No
Turn Signal Switch: GM 3 7/8″
Rack and Pinion Version: Yes

Extended Information:

Life Cycle Status: Available To Order

Packaging:

Quantity of Each: 1
Package UOM: EA
Dimension: 45.5 x 11.75 x 5.75 inches
Weight: 18.7 PG