DEI Reflect-A-Cool 12in x 12in Sheet DEI Reflect-A-Cool 12in x 12in Sheet $13.97
DEI Dyno Strap Heat Guard 5in w x 3ft - Aluminized DEI Dyno Strap Heat Guard 5in w x 3ft - Aluminized $38.80

DEI Reflect-A-Cool 24in x 24in Sheet

$31.21

Reflect-A-Cool(TM) solves the problem of heat intrusion into interiors and components. Reflect-A-Cool(TM), constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool(TM) can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It’s that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000°F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065 in. thick Easy to apply, won’t lift off *DO NOT apply directly to exhaust components.
Reflect-A-Cool™ Heat Tape; 24 in. x 24 in. Sheet;
Reflect-A-Cool(TM) solves the problem of heat intrusion into interiors and components. Reflect-A-Cool(TM), constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool(TM) can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It’s that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065 in. thick Easy to apply, won’t lift off DO NOT apply directly to exhaust components.
Universal

  • Self-Adhesive Backing With Release Liner For Easy Installation
  • Radiant Heat Protection Up To 2000 Degrees F
  • Light Weight And Flexible-Trim To Size
  • Moisture And Solvent Resistant
  • Virtually NO Clearance Needed
  • Easy To Apply- Wont Lift Off
  • 24 in. x 24 in. sheet
  • 0.0065 in. Thick

Out of stock

SKU: dei10462 Category:

Free shipping on most orders over $250 using code “ShipFree” at checkout with destinations in the lower 48 states (Continental United States). Truck Freight, and oversize packaging are excluded.

  • 30 days easy returns
  • Most orders ship on the same day or within 48 hours
Guaranteed Safe Checkout

Reflect-A-Cool(TM) solves the problem of heat intrusion into interiors and components. Reflect-A-Cool(TM), constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400°F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool(TM) can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It’s that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000°F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065 in. thick Easy to apply, won’t lift off *DO NOT apply directly to exhaust components.
Reflect-A-Cool™ Heat Tape; 24 in. x 24 in. Sheet;
Reflect-A-Cool(TM) solves the problem of heat intrusion into interiors and components. Reflect-A-Cool(TM), constructed of fiberglass material backed with a layer of aluminized reflective foil to handle direct continuous temperature of 400F has many uses such as covering firewalls, marine engine compartments, RVs, in the tub of a race car where typical mechanical fasteners cannot be used and has many industrial uses. Reflect-A-Cool(TM) can be trimmed to fit just about any shape. Just measure, trim, face reflective side towards source of radiant heat and remove self-adhesive backing. It’s that easy. Protect wires, cables, hoses, pipes & tubing from radiant heat sources Radiant heat protection up to 2000F Self-adhesive backing with release liner for easy installation Moisture & solvent resistant Virtually NO clearance needed Light weight and flexible-Trim to size 0.0065 in. thick Easy to apply, won’t lift off DO NOT apply directly to exhaust components.
Universal

  • Self-Adhesive Backing With Release Liner For Easy Installation
  • Radiant Heat Protection Up To 2000 Degrees F
  • Light Weight And Flexible-Trim To Size
  • Moisture And Solvent Resistant
  • Virtually NO Clearance Needed
  • Easy To Apply- Wont Lift Off
  • 24 in. x 24 in. sheet
  • 0.0065 in. Thick

Additional information

Weight 0.6 lbs
Dimensions 11 × 8 × 1 in
air_freight_prohibited

false
not_carb_approved

false
ltl_freight_required

false
prop_65

Y
part_type

automotive
epa

N/A
carb_acknowledgement_required

false
regular_stock

t
upc

607078104625
brand

DEI
part_number

10462

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.