BMR 98-02 4th Gen F-Body K-Member w/ Turbo LS1 Motor Mounts and STD. Rack Mounts – Red

Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits with a Tubular K-members from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-5/8-inch x 0.120 wall and 1-1/4-inch x 0.095 wall DOM tubing, BMRs K-members give you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment. The K-members are built with provision for either factory or manual steering racks.Designed for street performance, drag race, and road race applications, BMR Tubular K-members drop weight and add loads of structural rigidity. BMRs unique K-member design feature integrated frame stands that replace the factory cast iron frame stands. This additional weight reduction allows us to use larger diameter tubing and thicker mounting plates for additional strength over other companies K-members. When combined with BMRs upper and lower A-arms, a minimum weight reduction of 42 pounds is common. With other lightweight frontend parts, weight reduction of up to 100 pounds is easily achievable.BMR Suspensions KM013 Tubular K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 4-5 hours. Proudly made in the U.S.A.!
Reduce weight, increase front end rigidity, and add clearance for large-tube headers and turbo kits with a KM013 Tubular K-members from BMR Suspension
Designed to fit 1998-2002 LS1 GM F-body;Designed with extra room for turbo applications;Lighter than other competitors K-members due to integrated motor mount design;Built from heavy-duty 1-5/8-inch x 0.120 wall and 1-1/4-inch x 0.095 wall DOM tubing;Additional -inch of A-arm adjustability provides up to 4 degrees of additional camber adjustment;Works with stock A-arms or any aftermarket A-arms;Designed with LS1 engine mounts;Designed for stock steering rack;Designed for street performance, drag race, and handling applications;Durable powdercoat finish;4-5 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Fitment:
1998 Chevrolet Camaro Z28
1998 Chevrolet Camaro Z28 SS
1998 Pontiac Firebird Formula
1998 Pontiac Firebird Trans Am
1999 Chevrolet Camaro Z28
1999 Chevrolet Camaro Z28 SS
1999 Pontiac Firebird Formula
1999 Pontiac Firebird Trans Am
2000 Chevrolet Camaro Z28
2000 Chevrolet Camaro Z28 SS
2000 Pontiac Firebird Formula
2000 Pontiac Firebird Trans Am
2001 Chevrolet Camaro Z28
2001 Chevrolet Camaro Z28 SS
2001 Pontiac Firebird Formula
2001 Pontiac Firebird Trans Am
2002 Chevrolet Camaro Z28
2002 Chevrolet Camaro Z28 SS
2002 Pontiac Firebird Formula
2002 Pontiac Firebird Trans Am