Add to cart
BMR 67-69 1st Gen F-Body Front Hollow 1.25in Sway Bar Kit w/ Bushings - Red BMR 67-69 1st Gen F-Body Front Hollow 1.25in Sway Bar Kit w/ Bushings - Red $319.95
BMR 82-02 3rd Gen F-Body Non-Adj. Rear Suspension Kit (Polyurethane) - Red BMR 82-02 3rd Gen F-Body Non-Adj. Rear Suspension Kit (Polyurethane) - Red $189.95

BMR 82-02 3rd Gen F-Body Rear Hollow 25mm Sway Bar Kit w/ Bushings – Black Hammertone

$249.95

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB003 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 25mm DOM tubing, the SB003 is cold formed to better resist torsional fatigue and retain its “memory” far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB003 attaches to your Camaro with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The fabricated laser cut, TIG-welded steel sway bar end links are reinforced to minimize deflection.BMR Suspension designed the SB003 sway bar for street performance, drag race, autocross, and road race applications. The SB003 gives you a 149% increase in rate over the stock bar (depending on year and model). These rate increases allow you to fine-tune the handling characteristics of the suspension so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength without adding a lot of weight. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB003 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!All kits come with polyurethane mounting bushings and endlink kits.
BMR Suspension designed the SB003 sway bar kit for street performance, autocross, and road race applications.
Fits 1982-2002 GM F-body;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;149% increase in sway bar rate (depending on year and model);Cold formed to better resist torsional fatigue;Manufactured from 25mm heavy-wall DOM tubing for increased strength;88-durometer, greasable polyurethane bushings;Zinc-plated inner sleeves;Durable powdercoat finish;1-2-hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Only 1 left in stock

Add to Cart
BMR 82-02 3rd Gen F-Body Rear Hollow 25mm Sway Bar Kit w/ Bushings - Black Hammertone
BMR 82-02 3rd Gen F-Body Rear Hollow 25mm Sway Bar Kit w/ Bushings - Black Hammertone
$249.95
SKU: BMR-SB003H Category:
BMR Suspension logo

Free shipping on most orders over $250 using code “ShipFree” at checkout with destinations in the lower 48 states (Continental United States). Truck Freight, and oversize packaging are excluded.

  • 30 days easy returns
  • Most orders ship on the same day or within 48 hours
Guaranteed Safe Checkout

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB003 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 25mm DOM tubing, the SB003 is cold formed to better resist torsional fatigue and retain its “memory” far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB003 attaches to your Camaro with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The fabricated laser cut, TIG-welded steel sway bar end links are reinforced to minimize deflection.BMR Suspension designed the SB003 sway bar for street performance, drag race, autocross, and road race applications. The SB003 gives you a 149% increase in rate over the stock bar (depending on year and model). These rate increases allow you to fine-tune the handling characteristics of the suspension so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength without adding a lot of weight. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB003 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!All kits come with polyurethane mounting bushings and endlink kits.
BMR Suspension designed the SB003 sway bar kit for street performance, autocross, and road race applications.
Fits 1982-2002 GM F-body;Designed for street performance, autocross, and road race applications;Dramatically reduces body roll;149% increase in sway bar rate (depending on year and model);Cold formed to better resist torsional fatigue;Manufactured from 25mm heavy-wall DOM tubing for increased strength;88-durometer, greasable polyurethane bushings;Zinc-plated inner sleeves;Durable powdercoat finish;1-2-hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Fitment:
1982 Chevrolet Camaro Berlinetta
1982 Chevrolet Camaro Sport
1982 Chevrolet Camaro Z28
1982 Chevrolet Camaro Z28 Indianapolis 500 Pace Car
1982 Pontiac Firebird Base
1982 Pontiac Firebird S/E
1982 Pontiac Firebird Trans Am
1983 Chevrolet Camaro Berlinetta
1983 Chevrolet Camaro Sport
1983 Chevrolet Camaro Z28
1983 Pontiac Firebird Base
1983 Pontiac Firebird S/E
1983 Pontiac Firebird Trans Am
1984 Chevrolet Camaro Berlinetta
1984 Chevrolet Camaro Sport
1984 Chevrolet Camaro Z28
1984 Pontiac Firebird Base
1984 Pontiac Firebird S/E
1984 Pontiac Firebird Trans Am
1985 Chevrolet Camaro Berlinetta
1985 Chevrolet Camaro Iroc-Z
1985 Chevrolet Camaro Sport
1985 Chevrolet Camaro Z28
1985 Pontiac Firebird Base
1985 Pontiac Firebird S/E
1985 Pontiac Firebird Trans Am
1986 Chevrolet Camaro Berlinetta
1986 Chevrolet Camaro Iroc-Z
1986 Chevrolet Camaro Sport
1986 Chevrolet Camaro Z28
1986 Pontiac Firebird Base
1986 Pontiac Firebird S/E
1986 Pontiac Firebird Trans Am
1987 Chevrolet Camaro Iroc-Z
1987 Chevrolet Camaro LT
1987 Chevrolet Camaro Sport
1987 Chevrolet Camaro Z28
1987 Pontiac Firebird Base
1987 Pontiac Firebird Trans Am
1988 Chevrolet Camaro Base
1988 Chevrolet Camaro Iroc-Z
1988 Pontiac Firebird Base
1988 Pontiac Firebird Trans Am
1989 Chevrolet Camaro Iroc-Z
1989 Chevrolet Camaro RS
1989 Pontiac Firebird Base
1989 Pontiac Firebird Formula
1989 Pontiac Firebird Trans Am
1989 Pontiac Firebird Trans Am GTA
1989 Pontiac Firebird Trans Am GTA SE
1990 Chevrolet Camaro Iroc-Z
1990 Chevrolet Camaro RS
1990 Pontiac Firebird Base
1990 Pontiac Firebird Formula
1990 Pontiac Firebird Trans Am
1990 Pontiac Firebird Trans Am GTA
1991 Chevrolet Camaro RS
1991 Chevrolet Camaro Z28
1991 Pontiac Firebird Base
1991 Pontiac Firebird Formula
1991 Pontiac Firebird Trans Am
1991 Pontiac Firebird Trans Am GTA
1992 Chevrolet Camaro RS
1992 Chevrolet Camaro RS Heritage Edition
1992 Chevrolet Camaro Z28
1992 Chevrolet Camaro Z28 Heritage Edition
1992 Pontiac Firebird Base
1992 Pontiac Firebird Formula
1992 Pontiac Firebird Trans Am
1992 Pontiac Firebird Trans Am GTA
1993 Chevrolet Camaro Base
1993 Chevrolet Camaro Indianapolis 500 Pace Car
1993 Chevrolet Camaro Z28
1993 Pontiac Firebird Base
1993 Pontiac Firebird Formula
1993 Pontiac Firebird Trans Am
1994 Chevrolet Camaro Base
1994 Chevrolet Camaro Z28
1994 Pontiac Firebird Base
1994 Pontiac Firebird Formula
1994 Pontiac Firebird Trans Am
1994 Pontiac Firebird Trans Am GT
1995 Chevrolet Camaro Base
1995 Chevrolet Camaro Z28
1995 Pontiac Firebird Base
1995 Pontiac Firebird Formula
1995 Pontiac Firebird Trans Am
1996 Chevrolet Camaro Base
1996 Chevrolet Camaro RS
1996 Chevrolet Camaro Z28
1996 Pontiac Firebird Base
1996 Pontiac Firebird Formula
1996 Pontiac Firebird Trans Am
1997 Chevrolet Camaro Base
1997 Chevrolet Camaro RS
1997 Chevrolet Camaro Z28
1997 Pontiac Firebird Base
1997 Pontiac Firebird Formula
1997 Pontiac Firebird Trans Am
1998 Chevrolet Camaro Base
1998 Chevrolet Camaro Z28
1998 Chevrolet Camaro Z28 SS
1998 Pontiac Firebird Base
1998 Pontiac Firebird Formula
1998 Pontiac Firebird Trans Am
1999 Chevrolet Camaro Base
1999 Chevrolet Camaro Z28
1999 Chevrolet Camaro Z28 SS
1999 Pontiac Firebird Base
1999 Pontiac Firebird Formula
1999 Pontiac Firebird Trans Am
2000 Chevrolet Camaro Base
2000 Chevrolet Camaro Z28
2000 Chevrolet Camaro Z28 SS
2000 Pontiac Firebird Base
2000 Pontiac Firebird Formula
2000 Pontiac Firebird Trans Am
2001 Chevrolet Camaro Base
2001 Chevrolet Camaro Z28
2001 Chevrolet Camaro Z28 SS
2001 Pontiac Firebird Base
2001 Pontiac Firebird Formula
2001 Pontiac Firebird Trans Am
2002 Chevrolet Camaro Base
2002 Chevrolet Camaro Z28
2002 Chevrolet Camaro Z28 SS
2002 Pontiac Firebird Base
2002 Pontiac Firebird Formula
2002 Pontiac Firebird Trans Am

Additional information

Weight 12.2 lbs
Dimensions 46.9 × 13.5 × 5.4 in
air_freight_prohibited

false
not_carb_approved

false
ltl_freight_required

false
prop_65

Unknown
part_type

automotive
epa

N/A
carb_acknowledgement_required

false
upc

887753325761
brand

BMR Suspension
part_number

SB003H

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Brand

BMR Suspension

BMR Suspension - Performance Suspension and Chassis Components
BMR Suspension logo