Add to cart
BMR 08-17 Challenger Non-Adj. Upper Control Arms (Polyurethane) - Black Hammertone BMR 08-17 Challenger Non-Adj. Upper Control Arms (Polyurethane) - Black Hammertone $179.95
BMR 05-14 S197 Mustang Non-Adj. Boxed Lower Control Arms (Polyurethane) - Red BMR 05-14 S197 Mustang Non-Adj. Boxed Lower Control Arms (Polyurethane) - Red $109.95

BMR 79-98 Fox Mustang Single Adj. Lower Control Arms / Rod End (Polyurethane) – Black Hammertone

$309.95

Launching harder, reducing wheel hop, and adding cornering consistency to your 1979-1998 Mustang is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR’s polyurethane/rod end, single-adjustable tubular control arms for Fox body Mustangs (TCA049) are manufactured from heavy-duty 1 5/8-inch DOM steel tubing. This design gives you a strong control arm that greatly improves performance, with the adjustability to fine-tune the rear axle alignment. The integrated spring perch is built from heavy-duty plate steel for loads of strength. Greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR’s bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR Suspension designed the TCA049 to work well in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you’re left with poor performance. The TCA049’s heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR’s polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings and rod ends easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling.
BMR’s polyurethane/rod end, single-adjustable tubular control arms for Fox body Mustangs (TCA049) are manufactured from heavy-duty 1 5/8-inch DOM steel tubing. This design gives you a strong control arm that greatly improves performance.
Fits all Fox Body Mustangs (1979-1998);Single?adjustable design;High-durometer internally fluted polyurethane greasable bushings;Heavy-duty Teflon-lined rods ends;CNC-machines rod ends spacers;MIG-welded 1 5/8-inch DOM steel tubing;Dramatically reduces control arms flex;Greatly reduces bushing deflection;Improved Performance with acceptable NVH levels;Designed for street performance, drag race, and road race applications;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Add to Cart
BMR 79-98 Fox Mustang Single Adj. Lower Control Arms / Rod End (Polyurethane) - Black Hammertone
BMR 79-98 Fox Mustang Single Adj. Lower Control Arms / Rod End (Polyurethane) - Black Hammertone
$309.95
SKU: BMR-TCA049H Category:
BMR Suspension logo

Free shipping on most orders over $250 using code “ShipFree” at checkout with destinations in the lower 48 states (Continental United States). Truck Freight, and oversize packaging are excluded.

  • 30 days easy returns
  • Most orders ship on the same day or within 48 hours
Guaranteed Safe Checkout

Launching harder, reducing wheel hop, and adding cornering consistency to your 1979-1998 Mustang is easy with lower control arms from BMR Suspension. Stock stamped steel control arms with soft rubber bushings deflect under load and absorb power instead of transferring it to the tires. BMR’s polyurethane/rod end, single-adjustable tubular control arms for Fox body Mustangs (TCA049) are manufactured from heavy-duty 1 5/8-inch DOM steel tubing. This design gives you a strong control arm that greatly improves performance, with the adjustability to fine-tune the rear axle alignment. The integrated spring perch is built from heavy-duty plate steel for loads of strength. Greasable, 95-durometer bushings add a solid, more responsive feel over the stock rubber bushings. BMR’s bushings are internally fluted, which allows grease to evenly coat the inner sleeve. These flutes also direct grease to the outer edge of the bushing, keeping the thrust surface lubricated. This efficient lubrication ensures quiet, reliable operation over the life of the bushings. BMR Suspension designed the TCA049 to work well in street performance, drag race, and road race applications. The stock control arms flex under cornering loads giving you inconsistent handling characteristics. Combine this with soft bushings that have massive amounts of deflection and you’re left with poor performance. The TCA049’s heavy-duty construction eliminates control arm flex, giving you much improved repeatability on the street, starting line, or in the corners. BMR’s polyurethane bushings are designed to be compliant enough to give you a comfortable ride and absorb NVH, while remaining firm enough to stand up to high loads of any performance environment. The bushings and rod ends easily handle the high compression loads of hard launches and hard acceleration, yet offer plenty of articulation for great handling.
BMR’s polyurethane/rod end, single-adjustable tubular control arms for Fox body Mustangs (TCA049) are manufactured from heavy-duty 1 5/8-inch DOM steel tubing. This design gives you a strong control arm that greatly improves performance.
Fits all Fox Body Mustangs (1979-1998);Single?adjustable design;High-durometer internally fluted polyurethane greasable bushings;Heavy-duty Teflon-lined rods ends;CNC-machines rod ends spacers;MIG-welded 1 5/8-inch DOM steel tubing;Dramatically reduces control arms flex;Greatly reduces bushing deflection;Improved Performance with acceptable NVH levels;Designed for street performance, drag race, and road race applications;Durable powdercoat finish;1-2 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Fitment:
1979 Ford Mustang Base
1979 Ford Mustang Ghia
1980 Ford Mustang Base
1980 Ford Mustang Ghia
1981 Ford Mustang Base
1981 Ford Mustang Cobra
1981 Ford Mustang Ghia
1982 Ford Mustang GL
1982 Ford Mustang GLX
1982 Ford Mustang GT
1982 Ford Mustang L
1983 Ford Mustang GL
1983 Ford Mustang GLX
1983 Ford Mustang GT
1983 Ford Mustang L
1983 Ford Mustang Turbo GT
1984 Ford Mustang GT
1984 Ford Mustang GT-350 20th Anniversary
1984 Ford Mustang L
1984 Ford Mustang LX
1984 Ford Mustang SVO
1985 Ford Mustang GT
1985 Ford Mustang LX
1985 Ford Mustang SVO
1986 Ford Mustang GT
1986 Ford Mustang LX
1986 Ford Mustang SVO
1987 Ford Mustang GT
1987 Ford Mustang LX
1988 Ford Mustang GT
1988 Ford Mustang LX
1989 Ford Mustang GT
1989 Ford Mustang LX
1990 Ford Mustang GT
1990 Ford Mustang LX
1991 Ford Mustang GT
1991 Ford Mustang LX
1992 Ford Mustang GT
1992 Ford Mustang LX
1993 Ford Mustang GT
1993 Ford Mustang LX
1993 Ford Mustang SVT Cobra
1993 Ford Mustang SVT Cobra R
1994 Ford Mustang Base
1994 Ford Mustang GT
1994 Ford Mustang SVT Cobra
1995 Ford Mustang Base
1995 Ford Mustang GT
1995 Ford Mustang GTS
1995 Ford Mustang SVT Cobra
1995 Ford Mustang SVT Cobra R
1996 Ford Mustang Base
1996 Ford Mustang GT
1996 Ford Mustang SVT Cobra
1997 Ford Mustang Base
1997 Ford Mustang GT
1997 Ford Mustang SVT Cobra
1998 Ford Mustang Base
1998 Ford Mustang GT
1998 Ford Mustang SVT Cobra

Additional information

Weight 14.6 lbs
Dimensions 22 × 10.4 × 6.7 in
air_freight_prohibited

false
not_carb_approved

false
ltl_freight_required

false
prop_65

Unknown
part_type

automotive
epa

N/A
carb_acknowledgement_required

false
upc

887753329196
brand

BMR Suspension
part_number

TCA049H

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Brand

BMR Suspension

BMR Suspension - Performance Suspension and Chassis Components
BMR Suspension logo