Add to cart
BMR 15-17 S550 Mustang Front 2-Point Subframe Chassis Brace - Red BMR 15-17 S550 Mustang Front 2-Point Subframe Chassis Brace - Red $119.95
BMR 15-17 S550 Mustang Front 4-Point Subframe Chassis Brace - Red BMR 15-17 S550 Mustang Front 4-Point Subframe Chassis Brace - Red $239.95

BMR 15-17 S550 Mustang Front 2-Point Subframe Chassis Brace – Black Hammertone

$119.95

Increase steering stability and K-member rigidity on your S550 Mustang with a front Chassis Brace from BMR Suspension. The factory K-member legs can deflect under hard braking and extreme lateral loading. Built from heavy-duty 1- by 1.5-inch rectangular tubing and CNC-formed, laser-cut 3/16-inch steel plate, BMR’s CB007 Chassis Brace is designed to support and stiffen the factory S550 K-member. This increases steering feel and stability during aggressive braking and maneuvering. BMR’s CB007’s front Chassis Brace ties the rear legs of the K-member together, reinforcing this major area of the K-member. This effectively reduces deflection when fore, aft, and lateral loads are applied to the chassis. BMR Suspension designed the CB007 front Chassis Brace for street performance, drag race, and handling application. This 100% bolt-on kit use existing boltholes and supplied hardware, allowing for easy installation with simple hand tools. Once installed, the Chassis Brace minimizes K-member deflection with no change in NVH. This brace reduces deflection, increasing steering feel and stability on both the street and track. This brace is designed to fit with both stock and aftermarket headers and exhaust systems. BMR Suspension’s CB007 front Chassis Brace is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is less than 1 hour. Proudly made in the U.S.A.!
BMR Suspension designed the CB007 front Chassis Brace for street performance, drag race, and handling application.?
100% bolt-on design;No fabrication needed;Installs with simple hand tools;Manufactured from heavy-duty square steel tubing and CNC-formed 3/16-inch plate steel;CNC-machined billet aluminum spacers;Greatly reduces K-member deflection;Used factory boltholes and hardware;Works with stock and aftermarket headers and exhaust systems;No change in NVH;Durable powdercoat finish;Available in black hammertone and red powdercoat;Proudly designed in the U.S.A.;Proudly built in the U.S.A.

Only 2 left in stock

Add to Cart
BMR 15-17 S550 Mustang Front 2-Point Subframe Chassis Brace - Black Hammertone
BMR 15-17 S550 Mustang Front 2-Point Subframe Chassis Brace - Black Hammertone
$119.95
SKU: BMR-CB007H Category:
BMR Suspension logo

Free shipping on most orders over $250 using code “ShipFree” at checkout with destinations in the lower 48 states (Continental United States). Truck Freight, and oversize packaging are excluded.

  • 30 days easy returns
  • Most orders ship on the same day or within 48 hours
Guaranteed Safe Checkout

Increase steering stability and K-member rigidity on your S550 Mustang with a front Chassis Brace from BMR Suspension. The factory K-member legs can deflect under hard braking and extreme lateral loading. Built from heavy-duty 1- by 1.5-inch rectangular tubing and CNC-formed, laser-cut 3/16-inch steel plate, BMR’s CB007 Chassis Brace is designed to support and stiffen the factory S550 K-member. This increases steering feel and stability during aggressive braking and maneuvering. BMR’s CB007’s front Chassis Brace ties the rear legs of the K-member together, reinforcing this major area of the K-member. This effectively reduces deflection when fore, aft, and lateral loads are applied to the chassis. BMR Suspension designed the CB007 front Chassis Brace for street performance, drag race, and handling application. This 100% bolt-on kit use existing boltholes and supplied hardware, allowing for easy installation with simple hand tools. Once installed, the Chassis Brace minimizes K-member deflection with no change in NVH. This brace reduces deflection, increasing steering feel and stability on both the street and track. This brace is designed to fit with both stock and aftermarket headers and exhaust systems. BMR Suspension’s CB007 front Chassis Brace is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is less than 1 hour. Proudly made in the U.S.A.!
BMR Suspension designed the CB007 front Chassis Brace for street performance, drag race, and handling application.?
100% bolt-on design;No fabrication needed;Installs with simple hand tools;Manufactured from heavy-duty square steel tubing and CNC-formed 3/16-inch plate steel;CNC-machined billet aluminum spacers;Greatly reduces K-member deflection;Used factory boltholes and hardware;Works with stock and aftermarket headers and exhaust systems;No change in NVH;Durable powdercoat finish;Available in black hammertone and red powdercoat;Proudly designed in the U.S.A.;Proudly built in the U.S.A.

Fitment:
2015 Ford Mustang EcoBoost
2015 Ford Mustang EcoBoost Premium
2015 Ford Mustang GT
2015 Ford Mustang GT 50 Years Limited Edition
2015 Ford Mustang GT Premium
2015 Ford Mustang Shelby GT350
2015 Ford Mustang V6
2016 Ford Mustang EcoBoost
2016 Ford Mustang EcoBoost Premium
2016 Ford Mustang GT
2016 Ford Mustang GT Premium
2016 Ford Mustang Shelby GT350
2016 Ford Mustang Shelby GT350R
2016 Ford Mustang V6
2017 Ford Mustang EcoBoost
2017 Ford Mustang EcoBoost Premium
2017 Ford Mustang GT
2017 Ford Mustang GT Premium
2017 Ford Mustang Shelby GT350
2017 Ford Mustang Shelby GT350R
2017 Ford Mustang V6
2018 Ford Mustang EcoBoost
2018 Ford Mustang EcoBoost Premium
2018 Ford Mustang GT
2018 Ford Mustang GT Premium
2018 Ford Mustang Shelby GT350
2018 Ford Mustang Shelby GT350R
2019 Ford Mustang Bullitt
2019 Ford Mustang EcoBoost
2019 Ford Mustang EcoBoost Premium
2019 Ford Mustang GT
2019 Ford Mustang GT Premium
2019 Ford Mustang Shelby GT350
2019 Ford Mustang Shelby GT350R
2020 Ford Mustang Bullitt
2020 Ford Mustang EcoBoost
2020 Ford Mustang EcoBoost Premium
2020 Ford Mustang GT
2020 Ford Mustang GT Premium
2020 Ford Mustang Shelby GT350
2020 Ford Mustang Shelby GT350R
2020 Ford Mustang Shelby GT500

Additional information

Weight 7.8 lbs
Dimensions 50.4 × 5.3 × 5.2 in
air_freight_prohibited

false
not_carb_approved

false
ltl_freight_required

false
prop_65

Unknown
part_type

automotive
epa

N/A
carb_acknowledgement_required

false
upc

887753322425
brand

BMR Suspension
part_number

CB007H

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Brand

BMR Suspension

BMR Suspension - Performance Suspension and Chassis Components
BMR Suspension logo