Add to cart
BMR 05-14 S197 Mustang K-Member w/ 1/2in Lowered Motor Mounts and STD. Rack Mounts - Red BMR 05-14 S197 Mustang K-Member w/ 1/2in Lowered Motor Mounts and STD. Rack Mounts - Red $699.95
BMR 05-14 S197 Mustang K-Member w/ STD. Motor Mounts and STD. Rack Mounts - Black Hammertone BMR 05-14 S197 Mustang K-Member w/ STD. Motor Mounts and STD. Rack Mounts - Black Hammertone $699.95

BMR 05-14 S197 Mustang K-Member w/ 1/2in Lowered Motor Mount and STD. Rack Mounts – Black Hammertone

$699.95

Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits on your S197 Mustang with a Tubular K-member from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-inch, 1-1/4-inch, and 1 -inch DOM tubing, BMRs K-members give you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment.Designed for street performance, drag race, and handling applications, BMR Tubular K-members drop weight and significantly increases frontend structural rigidity. BMRs unique K-member design feature integrated engine mounts that replace the heavy factory mounts. These engine mounts lower the engine for extra underhood clearance. This additional weight reduction allows us to use larger diameter tubing and thicker mounting plates for additional strength over other companies K-members. The OE K-member and engine mounts weighs 46-pounds, while BMR K-member weighs only 26-pounds, giving you a 20-pound weight reduction. When combined with BMRs lower A-arms and other lightweight frontend parts, weight reduction of up to 75 pounds is easily achievable.BMR Suspensions KM020 Tubular K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!NOTES:- To retain the OE aero pan on 2011-2014 Mustangs, modification is necessary as the OE pieces are not a direct fit to the BMR K-Member.- BMR highly recommends its A-Arm Support Brace (AAS001) when using its Tubular K-Members for street and/or handling use.- BMR billet aluminum Motor Mount Upgrade (MM006) is recommended for applications above 700 lb-ft of torque.
Reduce weight, increase front end rigidity, and add clearance for large-tube headers and turbo kits with a KM020 Tubular K-members from BMR Suspension
Designed to fit 2005-2014 S197 Mustang;Lighter than competitors K-members;Manufactured from 1-inch, 1-1/4-inch, and 1 -inch DOM tubing;Works with stock A-arms or BMR A-arms;Give you a 20-pound reduction over the factory K-member and engine mounts;Designed with -inch lower engine mounts;Designed for stock hydraulic steering rack;Designed for street performance, drag race, and handling applications;Durable powdercoat finish;4-5 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Only 4 left in stock

Add to Cart
BMR 05-14 S197 Mustang K-Member w/ 1/2in Lowered Motor Mount and STD. Rack Mounts - Black Hammertone
BMR 05-14 S197 Mustang K-Member w/ 1/2in Lowered Motor Mount and STD. Rack Mounts - Black Hammertone
$699.95
SKU: BMR-KM020H Category:
BMR Suspension logo

Free shipping on most orders over $250 using code “ShipFree” at checkout with destinations in the lower 48 states (Continental United States). Truck Freight, and oversize packaging are excluded.

  • 30 days easy returns
  • Most orders ship on the same day or within 48 hours
Guaranteed Safe Checkout

Reduce weight, increase frontend rigidity, and add clearance for large-tube headers and turbo kits on your S197 Mustang with a Tubular K-member from BMR Suspension. BMR Tubular K-Members are designed to provide a lightweight alternative to the heavy and bulky factory K-member. Manufactured from 1-inch, 1-1/4-inch, and 1 -inch DOM tubing, BMRs K-members give you a lightweight, extremely strong K-member. Every BMR K-member is 100-percent bolt-in and requires no modifications for fitment.Designed for street performance, drag race, and handling applications, BMR Tubular K-members drop weight and significantly increases frontend structural rigidity. BMRs unique K-member design feature integrated engine mounts that replace the heavy factory mounts. These engine mounts lower the engine for extra underhood clearance. This additional weight reduction allows us to use larger diameter tubing and thicker mounting plates for additional strength over other companies K-members. The OE K-member and engine mounts weighs 46-pounds, while BMR K-member weighs only 26-pounds, giving you a 20-pound weight reduction. When combined with BMRs lower A-arms and other lightweight frontend parts, weight reduction of up to 75 pounds is easily achievable.BMR Suspensions KM020 Tubular K-Member is available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 3-4 hours. Proudly made in the U.S.A.!NOTES:- To retain the OE aero pan on 2011-2014 Mustangs, modification is necessary as the OE pieces are not a direct fit to the BMR K-Member.- BMR highly recommends its A-Arm Support Brace (AAS001) when using its Tubular K-Members for street and/or handling use.- BMR billet aluminum Motor Mount Upgrade (MM006) is recommended for applications above 700 lb-ft of torque.
Reduce weight, increase front end rigidity, and add clearance for large-tube headers and turbo kits with a KM020 Tubular K-members from BMR Suspension
Designed to fit 2005-2014 S197 Mustang;Lighter than competitors K-members;Manufactured from 1-inch, 1-1/4-inch, and 1 -inch DOM tubing;Works with stock A-arms or BMR A-arms;Give you a 20-pound reduction over the factory K-member and engine mounts;Designed with -inch lower engine mounts;Designed for stock hydraulic steering rack;Designed for street performance, drag race, and handling applications;Durable powdercoat finish;4-5 hour installation time;Proudly designed in the U.S.A.;Proudly made in the U.S.A.

Fitment:
2005 Ford Mustang Base
2005 Ford Mustang GT
2006 Ford Mustang Base
2006 Ford Mustang GT
2007 Ford Mustang Base
2007 Ford Mustang GT
2007 Ford Mustang Shelby GT
2007 Ford Mustang Shelby GT500
2008 Ford Mustang Base
2008 Ford Mustang Bullitt
2008 Ford Mustang GT
2008 Ford Mustang Shelby GT
2008 Ford Mustang Shelby GT500
2008 Ford Mustang Shelby GT500KR
2009 Ford Mustang Base
2009 Ford Mustang Bullitt
2009 Ford Mustang GT
2009 Ford Mustang Shelby GT500
2009 Ford Mustang Shelby GT500KR
2010 Ford Mustang Base
2010 Ford Mustang GT
2010 Ford Mustang Shelby GT500
2011 Ford Mustang Base
2011 Ford Mustang GT
2011 Ford Mustang Shelby GT500
2012 Ford Mustang Base
2012 Ford Mustang Boss 302
2012 Ford Mustang GT
2012 Ford Mustang Shelby GT500
2013 Ford Mustang Base
2013 Ford Mustang Boss 302
2013 Ford Mustang GT
2013 Ford Mustang Shelby GT500
2014 Ford Mustang Base
2014 Ford Mustang GT
2014 Ford Mustang Shelby GT500

Additional information

Weight 38.5 lbs
Dimensions 47.4 × 28.4 × 11.3 in
air_freight_prohibited

false
not_carb_approved

false
ltl_freight_required

false
prop_65

Unknown
part_type

automotive
epa

N/A
carb_acknowledgement_required

false
upc

887753324566
brand

BMR Suspension
part_number

KM020H

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Brand

BMR Suspension

BMR Suspension - Performance Suspension and Chassis Components
BMR Suspension logo