BluePrint BP302CTCK SBF 302 Crate Engine 361 HP – 334 Lbs Torque

BluePrint BP302CTCK Crate Engine. Small Block Ford Compatible, Drop-In Ready, Deluxe Dressed with Pulley Kit. Carbureted. 302 Cubic Inch, 361 Horsepower, 334 Ft/Lbs Torque – Each

Description:

• Horsepower & Torque: 361 Horsepower / 334 FT. LBS. Torque
• Compression Ratio: 9.4:1
• Aluminum Heads
• Hydraulic Roller Cam
• Cast Crank
• Hypereutectic Pistons

Block:

• BluePrint Engines High Strength Cast Iron Block
• Increased Deck Thickness and Strength Webbing
• Priority Main Oiling
• 4.000″ Bore
• 4-Bolt Main
• 1-Piece Rear Main Seal
• Improved Water Jacket Design

Rotating Assembly:

• Cast Crank3.000″ Stroke
• OEM Type 5.090″ Connecting Rods
• Hypereutectic Pistons
• 50oz Externally Balanced Front and Rear

Cylinder Heads:

• BluePrint Aluminum Cylinder Heads – HP9008
• 60cc Chamber
• 2.02″ Intake / 1.60″ Exhaust Valves
• 190cc Intake / 60cc Exhaust Runners

Cam Specs:

• Hydraulic Roller Cam
• .533 Intake / .544 Exhaust Lift
• 215 Intake / 220 Exhaust Duration
• @.050-114 Degree Lobe Separation

Ignition Timing:

• 10-16 Degrees Initial, 32-34 Total

Also Includes:

• Holley Street Warrior 600cfm Vacuum Secondary Carburetor w/ Electric Choke
• Front Sump Oil Pan
• Intake Manifold
• Distributor
• Spark Plugs and Plug Wires
• Harmonic Balancer
• Valve Covers
• Timing Cover
• Thermostat and Thermostat Housing
• Water Neck
• Front Accessory Drive with Water Pump, A/C Compressor, Alternator, and Power Steering Pump

Notes:

• The engine timing cover is designed for a standard rotation water pump and pulley kit ONLY.
• The front accessory drive on this engine is compatible with many vehicles; however, it is the customer’s responsibility to accurately measure and confirm the fit. Please note that this is a low-profile design; however, additional components, such as power steering hoses, alternator wiring, and specialized fittings/fabrication, may be required for some vehicles.
• This engine is an excellent choice for a cruiser or daily driver. This engine makes up to 13 inches of vacuum, and is designed to work excellently with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel